Ball Lock Connectors self-locking, with holder, compact construction
EH 22330.
Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.
The locating bushings are made from stainless steel. There are three versions available - mounting in wood (picture 2 and picture 4), one version that can be mounted in plastic (picture 3) and with holding (picture 5 and picture 6). In the bushings (picture 2, picture 3 and picture 5) the ball lock connector is lockable (4x90°). In the bushings (picture 4 and picture 6) the ball lock connector is rotatable.
As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.
Your selection resulted in 6 hits
More details
- Ball Lock Connectors – picture 1
- Nominal diameter d1: 6 mm
- l1: 23 mm
- l2: 1 mm
- d2: 3.5 mm
- d3: 14 mm
- d4: 6.9 mm
- l3: 25.1 mm
- l4: 16.5 mm
- l5: 6.2 mm
- l6: 8.8 mm
- l7: 8.1 mm
- Load capacity max.: 1.5 kN
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 9.8 g
- bushing, mounting in wood, lockable – picture 2
- Nominal diameter d1: 6.1 mm
- l1: 1 mm
- l2: 9 mm
- d2: 8.15 mm
- d3: 3.1 mm
- l3: 7 mm
- Location hole D1: 8.3 mm
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 1.6 g
- bushing, mounting in plastic, lockable – picture 3
- Nominal diameter d1: 6.1 mm
- l1: 1 mm
- l2: 9 mm
- d2: 10 mm
- d4: 8.2 mm
- l3: 6.5 mm
- Location hole D1 1): 8.3 mm
- l4: 8.2 mm
- WS: 4 mm
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 3.6 g
- bushing, mounting in wood, rotatable – picture 4
- Nominal diameter d1: 6.1 mm
- l1: 1 mm
- l2: 9 mm
- d2: 9.15 mm
- d3: 3.1 mm
- l3: 7 mm
- Location hole D1: 9.1 mm
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 2.4 g
- flexible mount, lockable – picture 5
- Nominal diameter d1: 6.1 mm
- l1: 1 mm
- l2: 14 mm
- d2: 8.4 mm
- d3: 14 mm
- d4: 3.5 mm
- l3: 7 mm
- l4: 6.8 mm
- l5: 23 mm
- l6: 16.5 mm
- l7: 24.1 mm
- l8: 8.5 mm
- Load capacity max.: 1.5 kN
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 13 g
- flexible mount, rotatable – picture 6
- Nominal diameter d1: 6.1 mm
- l1: 1 mm
- l2: 14 mm
- d2: 8.4 mm
- d3: 14 mm
- d4: 3.5 mm
- l3: 7 mm
- l4: 6.8 mm
- l5: 23 mm
- l6: 16.5 mm
- l7: 24.1 mm
- l8: 8.5 mm
- Load capacity max.: 1.5 kN
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 10 g
Material
Pin part
- Stainless steel 1.4542
Holder
- Stainless steel
Ball
- Stainless steel
Spring
- Stainless steel
Bushing
- Stainless steel 1.4305
Notes
Special types on request.
Assembly
Mounting into wood (picture 2 and picture 4)
- Insert location hole and pilot hole for safety bolt according to specifications
- Optionally recommended is the use of adhesive for securing
- Press in bushing
- Secure bushing with a screw
- Insert location hole according to instructions
- Screw in bushing
Note: The bore diameter (D2) for the pilot hole of the safety bolt depends on the screw used.
Note: The bore diameter to be chosen for the location hole depends on the hardness of the plastic.
Operation
The balls are unlocked by pressing the button.
Further products
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 23.01.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.