Down-Hold Clamps without clamping lever, with support
EH 23210.
By tightening the ball-ended thrust screw the workpiece is simultaneously pressed towards the stops and fixture plate. The favourable leverage enables high horizontal clamping forces. When using T-Nuts EH 23010. / EH 23020. (DIN 508) they can also be applied to other slot sizes.
Your selection resulted in 6 hits
More details
- with flat clamping jaw – picture 1
- T-slot size: 10 mm
- d1: M8
- d2: 8.4 mm
- d3: M8
- b1: 32 mm
- b2: 12.1 mm
- h1: 44 mm
- h2 ±0.01: 15 mm
- h3: ~ 40 mm
- h4: ~ 28 mm
- l1: 52 mm
- l2: 28 mm
- l3: 72.5 mm
- l4: 38 mm
- s: 3 mm
- Clamping force horizontal max.: 7 kN
- Tightening torque max.: 3 Nm
- Weight: 566 g
- with flat clamping jaw – picture 1
- T-slot size: 14 mm
- d1: M12
- d2: 13 mm
- d3: M12
- b1: 48 mm
- b2: 16 mm
- h1: 53 mm
- h2 ±0.01: 15 mm
- h3: ~ 45 mm
- h4: ~ 27 mm
- l1: 72 mm
- l2: 40 mm
- l3: 100 mm
- l4: 55 mm
- s: 4 mm
- Clamping force horizontal max.: 15 kN
- Tightening torque max.: 9 Nm
- Weight: 1349 g
- with flat clamping jaw – picture 1
- T-slot size: 18 mm
- d1: M16
- d2: 17 mm
- d3: M16
- b1: 68 mm
- b2: 18.8 mm
- h1: 72 mm
- h2 ±0.01: 20 mm
- h3: ~ 60 mm
- h4: ~ 38 mm
- l1: 86 mm
- l2: 41 mm
- l3: 126 mm
- l4: 63 mm
- s: 7 mm
- Clamping force horizontal max.: 21.5 kN
- Tightening torque max.: 20 Nm
- Weight: 3000 g
- with V-clamping jaw – picture 2
- T-slot size: 10 mm
- d1: M8
- d2: 8.4 mm
- d3: M8
- b1: 32 mm
- b2: 12.1 mm
- h1: 44 mm
- h2 ±0.01: 15 mm
- h3: ~ 40 mm
- h4: ~ 28 mm
- l1: 52 mm
- l2: 28 mm
- l3: 72.5 mm
- l4: 38 mm
- s: 3 mm
- Clamping force horizontal max.: 7 kN
- Tightening torque max.: 3 Nm
- Weight: 571 g
- with V-clamping jaw – picture 2
- T-slot size: 14 mm
- d1: M12
- d2: 13 mm
- d3: M12
- b1: 48 mm
- b2: 16 mm
- h1: 53 mm
- h2 ±0.01: 15 mm
- h3: ~ 45 mm
- h4: ~ 27 mm
- l1: 72 mm
- l2: 40 mm
- l3: 100 mm
- l4: 55 mm
- s: 4 mm
- Clamping force horizontal max.: 15 kN
- Tightening torque max.: 9 Nm
- Weight: 1340 g
- with V-clamping jaw – picture 2
- T-slot size: 18 mm
- d1: M16
- d2: 17 mm
- d3: M16
- b1: 68 mm
- b2: 18.8 mm
- h1: 72 mm
- h2 ±0.01: 20 mm
- h3: ~ 60 mm
- h4: ~ 38 mm
- l1: 86 mm
- l2: 41 mm
- l3: 126 mm
- l4: 63 mm
- s: 7 mm
- Clamping force horizontal max.: 21.5 kN
- Tightening torque max.: 20 Nm
- Weight: 3000 g
Material
- Steel, case-hardened, blackened, ground
References
The integrated support is equipped with a locating thread to fit for example screwed rest buttons EH 22690., self-aligning pads EH 22730. / EH 22740.
Further products
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 23.01.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.
What are the benefits of down-hold clamps compared to a machine vice?
Down-hold clamps possess a minimal interfering contour and can be positioned with great flexibility thanks to the matching holding plates. They also come in a version with clamping lever that can be operated without the help of tools.