Grub Screws DIN 6332 with thrust point

EH 22540.

Grub screws are clamping screws that can directly transmit forces via the thrust point. The pressure surface of the thrust point of the steel version is hardened.

For clamping sensitive surfaces, thrust pads EH 22560. (DIN 6311 and low version) can be attached on the thrust point. The snap ring of the thrust pad achieves a connection between the grub screw and the thrust pad that can be released by hand.

These grub screws with thrust points are particularly characterised by the additional radius "r" on the thrust point (optimisation compared to DIN 6332), which makes assembly in the thrust pad much easier.

The thrust point diameter of the grub screws is smaller than the core diameter of the thread, so that they can also be screwed in on the pin side.

Your selection resulted in 8 hits

Version
Material
picture
d1 [mm]
l1 [mm]
Article-No.
CAD
Available
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M8
l1 [mm]:
40 mm
Article-No.:
22540.0381
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V40
  • d1: M8
  • l1: 40 mm
  • d2 h11: 6 mm
  • d3: 5.4 mm
  • l2: 7.5 mm
  • l3: 3 mm
  • l4: ~ 43 mm
  • l5: ~ 42.5 mm
  • WS: 4 mm
  • Weight: 11 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M8
l1 [mm]:
60 mm
Article-No.:
22540.0382
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V40
  • d1: M8
  • l1: 60 mm
  • d2 h11: 6 mm
  • d3: 5.4 mm
  • l2: 7.5 mm
  • l3: 3 mm
  • l4: ~ 63 mm
  • l5: ~ 62.5 mm
  • WS: 4 mm
  • Weight: 17 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M10
l1 [mm]:
60 mm
Article-No.:
22540.0401
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70
  • d1: M10
  • l1: 60 mm
  • d2 h11: 8 mm
  • d3: 7.2 mm
  • l2: 9 mm
  • l3: 4.5 mm
  • l4: ~ 63.6 mm
  • l5: ~ 62.6 mm
  • WS: 5 mm
  • Weight: 26 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
60 mm
Article-No.:
22540.0421
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70/L12
  • d1: M12
  • l1: 60 mm
  • d2 h11: 8 mm
  • d3: 7.2 mm
  • l2: 10 mm
  • l3: 4.5 mm
  • l4: ~ 64.6 mm
  • l5: ~ 62.6 mm
  • WS: 6 mm
  • Weight: 36 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
80 mm
Article-No.:
22540.0422
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70/L12
  • d1: M12
  • l1: 80 mm
  • d2 h11: 8 mm
  • d3: 7.2 mm
  • l2: 10 mm
  • l3: 4.5 mm
  • l4: ~ 84.6 mm
  • l5: ~ 82.6 mm
  • WS: 6 mm
  • Weight: 51 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M12
l1 [mm]:
100 mm
Article-No.:
22540.0423
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70/L12
  • d1: M12
  • l1: 100 mm
  • d2 h11: 8 mm
  • d3: 7.2 mm
  • l2: 10 mm
  • l3: 4.5 mm
  • l4: ~ 104.6 mm
  • l5: ~ 102.6 mm
  • WS: 6 mm
  • Weight: 64 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M16
l1 [mm]:
100 mm
Article-No.:
22540.0462
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70/L16
  • d1: M16
  • l1: 100 mm
  • d2 h11: 12 mm
  • d3: 11 mm
  • l2: 12 mm
  • l3: 5 mm
  • l4: ~ 105.4 mm
  • l5: 102.9 mm
  • WS: 8 mm
  • Weight: 118 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details
Version:
with internal hexagon (IS)
Material:
Steel, blackened, quality 5.8, thrust point hardened
picture:
2
d1 [mm]:
M16
l1 [mm]:
125 mm
Article-No.:
22540.0463
CAD
Grub Screw
  • with internal hexagon (IS) – picture 2, steel
  • System: V70/L16
  • d1: M16
  • l1: 125 mm
  • d2 h11: 12 mm
  • d3: 11 mm
  • l2: 12 mm
  • l3: 5 mm
  • l4: ~ 130.4 mm
  • l5: 127.9 mm
  • WS: 8 mm
  • Weight: 150 g
  • RoHS: RoHS-compliant
  • REACH: contains SVHC materials >0.1% w/w
More details

Material

  • Steel, blackened, quality 5.8, thrust point hardened
Title
Category
Type
Direct download
Download basket
The most exciting variety in the realm of workpiece clamping
Category:
Documentation
Type:
PDF
Direct download:
Download basket:
Download basket
Datasheet EH 22540. Grub Screws – DIN 6332 with thrust point
Category:
Datasheet
Type:
PDF
Direct download:
Download basket:
Download basket