Spherical Washers / Conical Seats DIN 6319

EH 23050.

Application Areas

Spherical washers / Conical seats are used as washers in a screw connection to compensate non-parallel surfaces.

Material

Spherical washer

  • Case-hardened steel, case-hardened, manganese phosphated

Conical seat

  • Case-hardened steel, case-hardened, manganese phosphated
  • Heat-treated steel, tempered, manganese phosphated

Your selection resulted in 49 hits

Version
picture
d1 H13 [mm]
For pin d6 [mm]
For screws d6 [mm]
Load capacity for static load max. [kN]
Article-No.
CAD
Available
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
6.4 mm
For pin d6 [mm]:
6 mm
For screws d6 [mm]:
M6
Load capacity for static load max. [kN]:
9 kN
Article-No.:
23050.0006
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 6.4 mm
  • d3: 12 mm
  • h1: 0.7 mm
  • h2: 2.3 mm
  • h4 with conical seat form D: ~ 4.2 mm
  • h4 with conical seat form G: ~ 5.4 mm
  • r1: 9 mm
  • For pin d6: 6 mm
  • For screws d6: M6
  • Load capacity for static load max.: 9 kN
  • Torque for screwed connections1) max.: 10 Nm
  • Weight: 1 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
8.4 mm
For pin d6 [mm]:
8 mm
For screws d6 [mm]:
M8
Load capacity for static load max. [kN]:
17 kN
Article-No.:
23050.0008
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 8.4 mm
  • d3: 17 mm
  • h1: 0.6 mm
  • h2: 3.2 mm
  • h4 with conical seat form D: ~ 5.6 mm
  • h4 with conical seat form G: ~ 7.1 mm
  • r1: 12 mm
  • For pin d6: 8 mm
  • For screws d6: M8
  • Load capacity for static load max.: 17 kN
  • Torque for screwed connections1) max.: 25 Nm
  • Weight: 2.8 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
10.5 mm
For pin d6 [mm]:
10 mm
For screws d6 [mm]:
M10
Load capacity for static load max. [kN]:
26 kN
Article-No.:
23050.0010
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 10.5 mm
  • d3: 21 mm
  • h1: 0.8 mm
  • h2: 4 mm
  • h4 with conical seat form D: ~ 6.5 mm
  • h4 with conical seat form G: ~ 7.3 mm
  • r1: 15 mm
  • For pin d6: 10 mm
  • For screws d6: M10
  • Load capacity for static load max.: 26 kN
  • Torque for screwed connections1) max.: 46 Nm
  • Weight: 5.3 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
13 mm
For pin d6 [mm]:
12 mm
For screws d6 [mm]:
M12
Load capacity for static load max. [kN]:
38 kN
Article-No.:
23050.0012
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 13 mm
  • d3: 24 mm
  • h1: 1.1 mm
  • h2: 4.6 mm
  • h4 with conical seat form D: ~ 8 mm
  • h4 with conical seat form G: ~ 9 mm
  • r1: 17 mm
  • For pin d6: 12 mm
  • For screws d6: M12
  • Load capacity for static load max.: 38 kN
  • Torque for screwed connections1) max.: 82 Nm
  • Weight: 7.6 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
15 mm
For pin d6 [mm]:
14 mm
For screws d6 [mm]:
M14
Load capacity for static load max. [kN]:
53 kN
Article-No.:
23050.0014
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 15 mm
  • d3: 28 mm
  • h1: 1.4 mm
  • h2: 5 mm
  • h4 with conical seat form D: ~ 8.5 mm
  • h4 with conical seat form G: ~ 9.5 mm
  • r1: 22 mm
  • For pin d6: 14 mm
  • For screws d6: M14
  • Load capacity for static load max.: 53 kN
  • Torque for screwed connections1) max.: 130 Nm
  • Weight: 12 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
17 mm
For pin d6 [mm]:
16 mm
For screws d6 [mm]:
M16
Load capacity for static load max. [kN]:
73 kN
Article-No.:
23050.0016
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 17 mm
  • d3: 30 mm
  • h1: 1.3 mm
  • h2: 5.3 mm
  • h4 with conical seat form D: ~  9.6 mm
  • h4 with conical seat form G: ~ 10.4 mm
  • r1: 22 mm
  • For pin d6: 16 mm
  • For screws d6: M16
  • Load capacity for static load max.: 73 kN
  • Torque for screwed connections1) max.: 206 Nm
  • Weight: 13 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
21 mm
For pin d6 [mm]:
20 mm
For screws d6 [mm]:
M20
Load capacity for static load max. [kN]:
117 kN
Article-No.:
23050.0020
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 21 mm
  • d3: 36 mm
  • h1: 2 mm
  • h2: 6.3 mm
  • h4 with conical seat form D: ~ 11.7 mm
  • h4 with conical seat form G: ~ 12.2 mm
  • r1: 27 mm
  • For pin d6: 20 mm
  • For screws d6: M20
  • Load capacity for static load max.: 117 kN
  • Torque for screwed connections1) max.: 407 Nm
  • Weight: 23 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
23 mm
For pin d6 [mm]:
22 mm
For screws d6 [mm]:
M22
Load capacity for static load max. [kN]:
146 kN
Article-No.:
23050.0022 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 23 mm
  • d3: 40 mm
  • h1: 2.5 mm
  • h2: 7.6 mm
  • h4 with conical seat form D: ~ 13.5 mm
  • r1: 29.5 mm
  • For pin d6: 22 mm
  • For screws d6: M22
  • Load capacity for static load max.: 146 kN
  • Torque for screwed connections1) max.: 542 Nm
  • Weight: 34 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
25 mm
For pin d6 [mm]:
24 mm
For screws d6 [mm]:
M24
Load capacity for static load max. [kN]:
168 kN
Article-No.:
23050.0024
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 25 mm
  • d3: 44 mm
  • h1: 2.4 mm
  • h2: 8.2 mm
  • h4 with conical seat form D: ~ 15.2 mm
  • h4 with conical seat form G: ~ 15.7 mm
  • r1: 32 mm
  • For pin d6: 24 mm
  • For screws d6: M24
  • Load capacity for static load max.: 168 kN
  • Torque for screwed connections1) max.: 698 Nm
  • Weight: 45 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
28 mm
For pin d6 [mm]:
27 mm
For screws d6 [mm]:
M27
Load capacity for static load max. [kN]:
221 kN
Article-No.:
23050.0027 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 28 mm
  • d3: 50 mm
  • h1: 3.3 mm
  • h2: 10.2 mm
  • h4 with conical seat form D: ~ 17 mm
  • r1: 36 mm
  • For pin d6: 27 mm
  • For screws d6: M27
  • Load capacity for static load max.: 221 kN
  • Torque for screwed connections1) max.: 1021 Nm
  • Weight: 74 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
31 mm
For pin d6 [mm]:
30 mm
For screws d6 [mm]:
M30
Load capacity for static load max. [kN]:
269 kN
Article-No.:
23050.0030
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 31 mm
  • d3: 56 mm
  • h1: 3.6 mm
  • h2: 11.2 mm
  • h4 with conical seat form D: ~ 19.2 mm
  • h4 with conical seat form G: ~ 19.7 mm
  • r1: 41 mm
  • For pin d6: 30 mm
  • For screws d6: M30
  • Load capacity for static load max.: 269 kN
  • Torque for screwed connections1) max.: 1355 Nm
  • Weight: 101 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
34 mm
For pin d6 [mm]:
33 mm
For screws d6 [mm]:
M33
Load capacity for static load max. [kN]:
326 kN
Article-No.:
23050.0033 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 34 mm
  • d3: 62 mm
  • h1: 4.4 mm
  • h2: 13 mm
  • h4 with conical seat form D: ~ 21.8 mm
  • r1: 45 mm
  • For pin d6: 33 mm
  • For screws d6: M33
  • Load capacity for static load3) max.: 326 kN
  • Torque for screwed connections1) 3) max.: 1969 Nm
  • Weight: 150 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
37 mm
For pin d6 [mm]:
36 mm
For screws d6 [mm]:
M36
Load capacity for static load max. [kN]:
394 kN
Article-No.:
23050.0036
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 37 mm
  • d3: 68 mm
  • h1: 4.6 mm
  • h2: 14 mm
  • h4 with conical seat form D: ~ 23.5 mm
  • r1: 50 mm
  • For pin d6: 36 mm
  • For screws d6: M36
  • Load capacity for static load max.: 394 kN
  • Torque for screwed connections1) max.: 2372 Nm
  • Weight: 190 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
40 mm
For pin d6 [mm]:
39 mm
For screws d6 [mm]:
M39
Load capacity for static load max. [kN]:
460 kN
Article-No.:
23050.0039 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 40 mm
  • d3: 75 mm
  • h1: 5.6 mm
  • h2: 16 mm
  • h4 with conical seat form D: ~ 26.8 mm
  • r1: 54 mm
  • For pin d6: 39 mm
  • For screws d6: M39
  • Load capacity for static load3) max.: 460 kN
  • Torque for screwed connections1) 3) max.: 3276 Nm
  • Weight: 218 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
43 mm
For pin d6 [mm]:
42 mm
For screws d6 [mm]:
M42
Load capacity for static load max. [kN]:
542 kN
Article-No.:
23050.0042
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 43 mm
  • d3: 78 mm
  • h1: 6.5 mm
  • h2: 17 mm
  • h4 with conical seat form D: ~ 29 mm
  • r1: 58 mm
  • For pin d6: 42 mm
  • For screws d6: M42
  • Load capacity for static load max.: 542 kN
  • Torque for screwed connections1) max.: 3802 Nm
  • Weight: 310 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
50 mm
For pin d6 [mm]:
48 mm
For screws d6 [mm]:
M48
Load capacity for static load max. [kN]:
714 kN
Article-No.:
23050.0048
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 50 mm
  • d3: 92 mm
  • h1: 8 mm
  • h2: 21 mm
  • h4 with conical seat form D: ~ 35.5 mm
  • r1: 67 mm
  • For pin d6: 48 mm
  • For screws d6: M48
  • Load capacity for static load max.: 714 kN
  • Torque for screwed connections1) max.: 5730 Nm
  • Weight: 540 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
54 mm
For pin d6 [mm]:
52 mm
For screws d6 [mm]:
M52
Load capacity for static load max. [kN]:
832 kN
Article-No.:
23050.0052 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 54 mm
  • d3: 96 mm
  • h1: 9.3 mm
  • h2: 22 mm
  • h4 with conical seat form D: ~ 38.3 mm
  • r1: 72 mm
  • For pin d6: 52 mm
  • For screws d6: M52
  • Load capacity for static load3) max.: 832 kN
  • Torque for screwed connections1) 3) max.: 7876 Nm
  • Weight: 620 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
58 mm
For pin d6 [mm]:
56 mm
For screws d6 [mm]:
M56
Load capacity for static load max. [kN]:
960 kN
Article-No.:
23050.0056 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 58 mm
  • d3: 103 mm
  • h1: 9.8 mm
  • h2: 23 mm
  • h4 with conical seat form D: ~ 39.3 mm
  • r1: 79 mm
  • For pin d6: 56 mm
  • For screws d6: M56
  • Load capacity for static load3) max.: 960 kN
  • Torque for screwed connections1) 3) max.: 9793 Nm
  • Weight: 760 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
62 mm
For pin d6 [mm]:
60 mm
For screws d6 [mm]:
M60
Load capacity for static load max. [kN]:
1122 kN
Article-No.:
23050.0060 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 62 mm
  • d3: 112 mm
  • h1: 11 mm
  • h2: 25 mm
  • h4 with conical seat form D: ~ 43.6 mm
  • r1: 86 mm
  • For pin d6: 60 mm
  • For screws d6: M60
  • Load capacity for static load3) max.: 1122 kN
  • Torque for screwed connections1) 3) max.: 12219 Nm
  • Weight: 990 g
More details
Version:
spherical washers from case-hardened steel, form C
picture:
1
d1 H13 [mm]:
66 mm
For pin d6 [mm]:
64 mm
For screws d6 [mm]:
M64
Load capacity for static load max. [kN]:
1269 kN
Article-No.:
23050.0064 2)
CAD
Spherical Washers / Conical Seats
  • spherical washers from case-hardened steel, form C – picture 1
  • d1 H13: 66 mm
  • d3: 120 mm
  • h1: 12 mm
  • h2: 27 mm
  • h4 with conical seat form D: ~ 46.6 mm
  • r1: 93 mm
  • For pin d6: 64 mm
  • For screws d6: M64
  • Load capacity for static load3) max.: 1269 kN
  • Torque for screwed connections1) 3) max.: 14762 Nm
  • Weight: 1220 g
More details
Version:
conical seats from case-hardened steel, form D
picture:
2
d1 H13 [mm]:
-
For pin d6 [mm]:
6 mm
For screws d6 [mm]:
M6
Load capacity for static load max. [kN]:
9 kN
Article-No.:
23050.0106
CAD
Spherical Washers / Conical Seats
  • conical seats from case-hardened steel, form D – picture 2
  • d2 H13: 7.1 mm
  • d4: 12 mm
  • d5: 11 mm
  • h3: 2.8 mm
  • For pin d6: 6 mm
  • For screws d6: M6
  • Load capacity for static load max.: 9 kN
  • Torque for screwed connections1) max.: 10 Nm
  • Weight: 1.4 g
More details
Version:
conical seats from case-hardened steel, form D
picture:
2
d1 H13 [mm]:
-
For pin d6 [mm]:
8 mm
For screws d6 [mm]:
M8
Load capacity for static load max. [kN]:
17 kN
Article-No.:
23050.0108
CAD
Spherical Washers / Conical Seats
  • conical seats from case-hardened steel, form D – picture 2
  • d2 H13: 9.6 mm
  • d4: 17 mm
  • d5: 14.5 mm
  • h3: 3.5 mm
  • For pin d6: 8 mm
  • For screws d6: M8
  • Load capacity for static load max.: 17 kN
  • Torque for screwed connections1) max.: 25 Nm
  • Weight: 3.7 g
More details
Version:
conical seats from case-hardened steel, form D
picture:
2
d1 H13 [mm]:
-
For pin d6 [mm]:
10 mm
For screws d6 [mm]:
M10
Load capacity for static load max. [kN]:
26 kN
Article-No.:
23050.0110
CAD
Spherical Washers / Conical Seats
  • conical seats from case-hardened steel, form D – picture 2
  • d2 H13: 12 mm
  • d4: 21 mm
  • d5: 18.5 mm
  • h3: 4.2 mm
  • For pin d6: 10 mm
  • For screws d6: M10
  • Load capacity for static load max.: 26 kN
  • Torque for screwed connections1) max.: 46 Nm
  • Weight: 6.5 g
More details
Version:
conical seats from case-hardened steel, form D
picture:
2
d1 H13 [mm]:
-
For pin d6 [mm]:
12 mm
For screws d6 [mm]:
M12
Load capacity for static load max. [kN]:
38 kN
Article-No.:
23050.0112
CAD
Spherical Washers / Conical Seats
  • conical seats from case-hardened steel, form D – picture 2
  • d2 H13: 14.2 mm
  • d4: 24 mm
  • d5: 20 mm
  • h3: 5 mm
  • For pin d6: 12 mm
  • For screws d6: M12
  • Load capacity for static load max.: 38 kN
  • Torque for screwed connections1) max.: 82 Nm
  • Weight: 10 g
More details

Assembly

Conical seats form D are to be used only for plain, closed round areas.

For larger holes only use form G!

Title
Category
Type
Direct download
Download basket
Datasheet EH 23050. Spherical Washers / Conical Seats – DIN 6319
Category:
Datasheet
Type:
PDF
Direct download:
Download basket:
Download basket