Down-Thrust Clamps swivelling, low construction, size 44
EH 23310.
Universal mechanical clamping element for fast and comfortable changing and clamping of workpieces by means of manually swivelling clamping claw.
Clamps provide the following advantages:
- Rapid manual clamping by means of a threaded spindle or eccentric lever
- Easy and rapid changing of workpieces by swinging away the clamping claw to the left or right
- Low construction, thus little space taken-up for clamping
- Simple adaption even to extreme clamping heights, using height adjusting cylinders
Material
- Case-hardened steel, case-hardened, blackened and ground
References
The clamping height can be increased using height adjusting cylinders EH 23310. and with spacers EH 1107. and EH 1108.
Your selection resulted in 2 hits
Version
picture
d1 [mm]
d2 [mm]
h1 [mm]
h2 [mm]
Stroke [mm]
Article-No.
CAD
Available
Version:
with eccentric clamping lever
picture:
1
d1 [mm]:
44 mm
d2 [mm]:
M12
h1 [mm]:
25 mm – 30 mm
h2 [mm]:
54 mm – 59 mm
Stroke [mm]:
5 mm
Article-No.:
23310.0034
- with eccentric clamping lever – picture 1
- d1: 44 mm
- b1: 42 mm
- b2: 18 mm
- d2: M12
- h1: 25 mm – 30 mm
- h2: 54 mm – 59 mm
- h3: 15 mm
- h4: 28 mm
- l1: 61 mm
- l2: 40 mm
- l3: 100 mm
- Stroke: 5 mm
- Weight: 1022 g
Version:
with clamping screw
picture:
2
d1 [mm]:
44 mm
d2 [mm]:
M12
h1 [mm]:
25 mm – 30 mm
h2 [mm]:
54 mm – 59 mm
Stroke [mm]:
5 mm
Article-No.:
23310.0035
- with clamping screw – picture 2
- d1: 44 mm
- b1: 42 mm
- b2: 18 mm
- d2: M12
- h1: 25 mm – 30 mm
- h2: 54 mm – 59 mm
- h3: 15 mm
- h4: 13 mm
- l1: 61 mm
- l2: 40 mm
- Stroke: 5 mm
- Weight: 708 g
Assembly
Down-thrust clamps can be attached in two ways:
- in a T-slot, using a nut for T-slots DIN 508 (EH 23010.)
- with the set screw directly in the mounting plate of, for example, a fixture
The cylinder must make contact over the whole surface.